3D Printing

PN532 Breakout Board Mounting Plate And Drilling Guide

April 12, 2015 · claude 3D Printing

This thing contains a mounting plate and a drilling guide for the Adafruit “PN532 Breakout Board" (ID 364). The base plate is two mm thick. M2 5 mm or 1/4″ 4-40 screws are needed to fasten the board to the mounting plate. The mounting holes are three...

SparkFun RFID USB Reader mounting plate and drilling guide

April 10, 2015 · claude 3D Printing

This thing contains a mounting plate and a drilling guide for the "SparkFun RFID USB Reader" (SEN-09963). The base plate is one mm thick. M2 5 mm or 1/4" 4-40 screws are needed to fasten the board to the mounting plate. The mounting holes are three...

SMD Probe Case

March 25, 2015 · claude 3D Printing

This SMD probe can be bought on Ali Express or Ebay. The inner space (available space for storage) is 47 mm x 177 mm. Both parts should be printed with 100% of infill.

Business Cards And Credit Cards Storage Box

March 21, 2015 · claude 3D Printing

It is suitable for Norh American 2.5" x 3 " business card. In addition, credit cards also fit in this box.

Octoprint and Cura Disk Image for the Raspberry Pi (Version 2015-03-15)

March 16, 2015 · claude Raspberry PI Wheezy 3D Printing +2

Cura integrated with Octoprint brings your 3D printer to the next level. You can download from HERE a fully functional image of Cura integrated with Octoprint. Simply copy this image to an SD-card of 4GB or more. Instruction to copy an image on an...

Fume Extractor

March 15, 2015 · claude 3D Printing

This fume extractor uses carbon filters of 130mm x 130mm x 10mm. These are used for the HAKKO 491/493 fume extractor. To build it, you'll need:

Aluminium Extrusion Led Strip Holder

March 7, 2015 · claude 3D Printing

This thing is a self-adhesive strip holder who covers a 20 mm wide aluminium extrusion (like Misumi). The strip is 175 mm x 20 mm. It snaps in the extrusion groove. Stick the led strip on the holder.

Fan Holder for Aluminium Extrusion (New Design)

March 5, 2015 · claude 3D Printing

This fan holder for aluminium extrusion replaces the previous design (Aluminium Extrusion Fan Holder). The fan is now placed on top of the Ramps instead beside it, which makes it easier to remove if needed. It uses a 60 mm fan.

Aluminium Extrusion Fan Holder

March 4, 2015 · claude 3D Printing

This is a 60 mm fan holder to cool off a 3D Printer Ramps. This holder is design to be mounted on aluminium extrusion. A deflector is also provided to prevent the air to go on the heated bed.

Terminal Block Holder for Aluminium Extrusion

March 3, 2015 · claude 3D Printing

These are simple terminal block holders for Misumi aluminium extrusion (or equivalent). There is a 3 to 4 mm space between the extrusion and the terminal block to run some wires.

Tags