3D Printing

How to install Pronterface on Ubuntu 16.04

April 29, 2017 · claude Ubuntu 3D Printing

To install Pronterface on Unbuntu, first install the dependencies.

Case for the GM328A Components Tester

March 7, 2017 · claude 3D Printing

This object is a case for the GM328A Electronic Components Tester. It has a compartment for the 9V battery and an access hole for the extra test leads. The thin plate on the battery cover should be placed between the Component Tester and the battery...

Prusa i3 Simple LCD Holder

March 6, 2017 · claude 3D Printing

This is a simple Reprap character based LCD holder for a Prusa i3 3D printer. It is designed to be attached to a 6.35 mm tick frame, 45 mm in length. To mount this holder on the frame, you will need: - 1 x M3 25 mm screw with its nut - 1 x M3 16 mm...

Parametric Screw to Zip Tie Adapter

July 24, 2016 · claude 3D Printing

This is a simple parametric adapter that lets you mount a device designed for screws with a Zip Tie. You do not need to make holes in the thing holding the device.

Customizable Small Linear Carriage

July 17, 2016 · claude 3D Printing

This is a Customizable Small Linear Carriage Generator. This set of files generate the printable parts needed to build a small linear carriage. This carriage is designed to be a Z axis carriage while Customizable Linear Carriage Generator is the Y...

Extrusion Rail Customizable Fastener

March 27, 2016 · claude 3D Printing

The purpose of this bracket is to fasten an extrusion rail such as V-SLOT™ to a surface. For example, these are used to fasten the Customizable Linear Carriage Generator (http://www.thingiverse.com/thing:1411601) to the wooden base of the device. To...

Customizable Linear Carriage Generator

March 19, 2016 · claude 3D Printing

This set of files generate the printable parts needed to build a linear carriage. It can be heavily customized. The Libre Office Calc file is used to compute some key values needed to create the printable parts. Some resulting values have a variable...

Parametric utility box

February 21, 2016 · claude 3D Printing

This object is a parametric utility box with a bracket to join them together either by their sides or fronts. Sample STL files have been provided, which yield a box of 75 mm in width, 40 mm in depth and 100 mm in height along with both joining...

TRENDnet TK-207K KVM Mounting Bracket

August 28, 2015 · claude 3D Printing

This is a mounting bracket for the TRENDnet TK-207K KVM. It is a 2-Port USB KVM Switch. The device labeling is upside down. I preferred to have the heavy cables downward. This model is also published on Thingiverse.

Cable Hanger for Doors

August 9, 2015 · claude 3D Printing

This kit of 3D objects makes a cable hanger to be hooked to a door without screws. It is suitable for 6 feet cables assuming that the door is 80 inches high. Each cable holder section has 18 teeth or 17 grooves. Each groove is 3 cm deep. One cable...

Tags