Object

Voltmeter Support Plate

November 3, 2014 · claude 3D Printing

This is a simple plate for a cheap voltmeter. The voltmeter dimensions are 23 mm x 14 mm. The holes to screw the voltmeter to the plate are 28 mm apart. Once the voltmeter is on the plate, glue or double face tape is used to mount is on whatever you...

Parametrized Measuring Scoop

June 1, 2014 · claude 3D Printing

This Openscad 3D object generates a measuring scoop. Simply modify the scoop volume (given in milliliters) in the Openscad file and generate the STL file. You will end up with a measuring scoop of the given volume. Other parameters can be modified...

PN532 Breakout Board Mounting Plate

May 29, 2014 · claude 3D Printing

Specially designed for Adafruit's PN532 Breakout Board Mounting Plate (Product 364).

Enclosure For The Sparkfun RFID USB Reader

May 12, 2014 · claude 3D Printing

This is an enclosure for the Sparkfun's RFID USB Reader (SEN-09963).

20 mm wide 90 Degrees T-Slot Angle Brackets

April 28, 2014 · claude 3D Printing

20 x 20 x 20 mm, 20 x 40 x 40 mm and 20 x 60 x 60 mm 90 degrees T-Slot brackets.

Parametric Pipe/Rod/Tube Adapter

April 15, 2014 · claude 3D Printing

This openScad file is a pipe, tube or rod adapter. It lets you fit together two pipes of different diameters. Edit the file. Modify the first pipe diameter, the second pipe diameter, the adapter thickness and the total height. Render the file and you...

Tape Roll Holder Revisited

April 11, 2014 · claude 3D Printing

This is a simple holder for a Tape Roll. This design is much more robust than the previous one (Tape Roll Holder). You simply need to screw it to a vertical surface. You can use it for other purposes obviously.

Mounting plate for Arduino UNO/Duemilanove/Diecimila

April 6, 2014 · claude Arduino 3D Printing

A simple mounting plate for the Arduino UNO, Duemilavone, Diecimila, Freeduino or any other compatible boards. Use #4-40 screws to mount the board on the mounting plate.

40 MM Angle Bracket With Adjustable Foot

March 10, 2014 · claude 3D Printing

This is an adjustable foot for 40 mm T-Slot aluminium extrusion combined with a 90 degree bracket. It was design, especially for a 3D printer. It can serve other purposes obviously. You will likely need 4 feet and 4 angle brackets. Furthermore, you...

40 MM T-Slot Adjustable Foot

March 7, 2014 · claude 3D Printing

This is an adjustable foot for 40 mm T-Slot aluminium extrusion. It was design, especially for a 3D printer. It can serve other purposes obviously. You will likely need 4 feet, 2 right and 2 left supports. Furthermore, you will need four threaded...

Tags