Object

Twin Small Buckets for Ikea Ivar Shelving System

September 10, 2018 · claude 3D Printing

This is twin small buckets to be hanged on the side unit of the Ikea Ivar shelving system. The buckets themselves are 12.5 cm (L) x 4 cm (W) and 4 cm (D). Support is needed. Infill of 20% or above is suggested.

Ikea Ivar Brackets for 19 Inches Rack Mount Devices

September 3, 2018 · claude 3D Printing

This is a bracket for 19 inches rack mount devices. You will need to print each file two times. You will need the following hardware to attach the bracket on the Ivar side unit.

TRENDnet TK-207K KVM Holder for Ikea Ivar

August 27, 2018 · claude 3D Printing

This is a holder for a TRENDnet TK-207K KVM. The holder is hanged on a unit side of the Ikea Ivar shelving system. The TRENDnet TK-207K is a 2 ports Keyboard/Video/Mouse switch.

Ivar FlashLight Holder 2

August 19, 2018 · claude 3D Printing

This is a flashlight holder who is installed on the side unit of the Ivar shelving system. The hole holding the flashlight is 4.5 cm in diameter. It fits flashlight that uses D-cell batteries. You will also need 2 #4-40, 3/8" bolts and the matching...

Ikea Ivar Small Bucket

August 12, 2018 · claude 3D Printing

This is a small bucket to be hanged on the side unit of the Ikea Ivar shelving system. The bucket is 12.5 cm (L) x 4 cm (W) and 4 cm (D). Support is needed. Infill of 20% or above is suggested.

Ivar FlashLight Holder 1

August 6, 2018 · claude 3D Printing

This is a flashlight holder that is installed on the side unit of the Ivar shelving system. The hole that holds the flashlight 4.5 cm in diameter. It fits flashlight that uses D cell batteries.

Ivar Side Unit Drilling Template

July 30, 2018 · claude 3D Printing

This is a simple drilling template for the Ivar Shelving System. It is used to drill a hole between two vertical holes of a side unit.

Ikea Hemma Mounting Bracket

July 15, 2018 · claude 3D Printing

This is a mounting bracket for the Ikea Hemma light socket (E26). It is articulated in the Z axis. You will also need 2 hex bolts (1/4" x 3/4" or any equivalent) and the 2 matching butterfly nuts in order to assemble it.

Glass Riser For Photography

July 8, 2018 · claude 3D Printing

The photos of small objects are generally better when they are done on a suspended sheet of glass. Many resources from the web explain this technique.

Micro SD and SD Cards Holders

July 2, 2018 · claude 3D Printing

These objects are simple Micro SD and SD-card holders. They are designed to fit a small parts cabinet. The SD cards are put in the holder on its side otherwise it would be too tall for the drawers.

Tags