Object

EN-EL10 Battery Tray

January 18, 2020 · claude 3D Printing

This is two battery tray design for the EN-EL10 batteries. They are used by Nikon for their point and shoot cameras. One of the design holds 6 batteries while the other one holds 4 batteries at an angle for a lower overall height.

IN-12B Nixie Tube Storage Tray

January 11, 2020 · claude 3D Printing

This is a storage tray designed to hold 12 IN-12 Nixie Tubes. Each compartment is 30.5mm x 20.5mm x 20mm in height.

Stanley Picks and Hooks Pegboard Holder

January 4, 2020 · claude 3D Printing

This is a simple holder for the set of 4 Picks and Hooks made by Stanley. It is designed for the north American pegboard. The holes are 1 inch (25.4 mm) apart.

Alligator Clip Cable Pegboard Holder (updated)

December 30, 2019 · claude 3D Printing

It can hold up to 20 alligator clip cables. It is designed to be used with a North American pegboard. The distance between the holes is 1 inch (2.54 cm). The hole diameter is 1/4 of an inch (6.35 mm).

Parametric Open Box

December 22, 2019 · claude 3D Printing

This is a simple SCAD file that generates simple open boxes without chamfers or fillets. They fit snuggly together. A sample is included. To create a custom one:

Ivar Side Unit Hook

December 16, 2019 · claude 3D Printing

This is a simple Ivar Side Unit hook. No additional hardware is required.

FLSun Cube Part Cooling Fan

December 2, 2019 · claude 3D Printing

This is a part cooling fan for the FlSun. The original design has only one fan that cools the extruder and the part at the same time but it doesn't do a good job.

Flsun Cube Nozzle Cooling Duct

November 24, 2019 · claude 3D Printing

These objects replace the poor stock nozzle cooling system provided by FLsun. You will need 2 x M3-20 mm bolts and nuts to mount the fan along with the fan grid.

Bearing containers of various sizes

November 17, 2019 · claude 3D Printing

These are various cylindrical containers. Each container holds 10 bearings. For each size, two parts are required: the base and the lid. There are containers for the following bearings: 603ZZ, 605ZZ, 608ZZ, 624VV, 625ZZ, 693ZZ, 6700ZZ, F688ZZ,...

FLsun Cube Extruder Holder

November 10, 2019 · claude 3D Printing

The stock Flsun Cube extruder is quite bad. I replaced it with an all-metal one available almost everywhere. The holder didn't fit anymore. So I designed this one. Also included, adapted strain relief for the Bowden tube.

Tags