Audio Selector Enclosure for 3.5 mm Jacks (November 15, 2026)
English Français
Antre du Tryphon
Search

3D Printing

388 posts · Show all posts

3.5 inch Hard Drive Box

3.5 inch Hard Drive Box

November 8, 2020 · claude 3D Printing
This is a box for a 3.5 inch hard drive and its cover. It was specifically designed to fit in a small safety box often rented by banks.

Electronic Bench Organizer

Electronic Bench Organizer

October 31, 2020 · claude 3D Printing
This is an organizer especially designed for an electronic bench to hold small parts, screws, etc.

Magazine File

Magazine File

October 24, 2020 · claude 3D Printing
This is a magazine file 60 mm wide. It is designed for letter size paper. It is by design a bit smaller than the document it holds. It has holes to mount it on the side of a desk.

CR-10 Under Bed Tray

CR-10 Under Bed Tray

October 18, 2020 · claude 3D Printing
These are trays to put under a CR-10 3D printer. The separator of one tray are 15 mm in height. For the other one, 38 mm in height which is the total height of the tray. The overall size of both trays are the same.

Hanging Open Box

Hanging Open Box

October 11, 2020 · claude 3D Printing
This is an open box that can be hanged using 2 screws. The diameter of the head of the screw must be less than 1 cm. Its dimensions are 100 mm wide, 100 mm in height and 60 mm depth.

3D Printing Trashcan

3D Printing Trashcan

September 26, 2020 · claude 3D Printing
This is a small trashcan for 3D printing. The way the cover is designed, plastic stuff in the trashcan won't spring back outside it. The trashcan is 80 mm in diameter, 100 mm in height.

Parametric Round Container

Parametric Round Container

July 13, 2020 · claude 3D Printing
It is a simple parametric round container.

Wires And Probes Hanger

Wires And Probes Hanger

June 26, 2020 · claude 3D Printing
This object will let you suspend your wires and probes on a door. To complete this assembly, you will need a pipe or tube of 5/8 in or 16 mm in diameter. Two little screws can also be used to secure the tube to the hanger. You will need to print 2...

Drawer Dividers for Small Parts Cabinet

Drawer Dividers for Small Parts Cabinet

June 13, 2020 · claude 3D Printing
These are small drawer dividers. There are 2 models. One for the drawer cabinet sold by Canadian Tire. The other one is for drawer cabinet sold by Home Depot.

40 mm Extrusion Vibration Absorber

40 mm Extrusion Vibration Absorber

May 31, 2020 · claude 3D Printing
This is an anti-vibration foot for 40 mm aluminum extrusion. I had good results using semi-flexible filament. I added some anti-sliding pad. They were specifically designed for an Ender-3 printer.