Antre du Tryphon

Fan Holder for Aluminium Extrusion (New Design)

March 5, 2015 · claude 3D Printing

This fan holder for aluminium extrusion replaces the previous design (Aluminium Extrusion Fan Holder). The fan is now placed on top of the Ramps instead beside it, which makes it easier to remove if needed. It uses a 60 mm fan.

Aluminium Extrusion Fan Holder

March 4, 2015 · claude 3D Printing

This is a 60 mm fan holder to cool off a 3D Printer Ramps. This holder is design to be mounted on aluminium extrusion. A deflector is also provided to prevent the air to go on the heated bed.

Terminal Block Holder for Aluminium Extrusion

March 3, 2015 · claude 3D Printing

These are simple terminal block holders for Misumi aluminium extrusion (or equivalent). There is a 3 to 4 mm space between the extrusion and the terminal block to run some wires.

3D Printing ABS Juice

March 1, 2015 · claude 3D Printing ABS

ABS juice makes the first layer of a print stick very well to the print bed. Put a small quantity of ABS juice on a paper towel and rub it gently on the printing bed. Making ABS juice is simple. In order to do so, you will need:

How to Install libnfc for PN532 NFC Readers on Linux

February 25, 2015 · claude Ubuntu 11.10 Ubuntu 11.04 Ubuntu +5

Installing libnfc for PN532 based NFC reader is not exactly as described in the documentation. Some information is scattered in the documentation. This installation guide has been tested with the GO2NFC GO2NFC141U NFC Reader and the Adafruit PN532...

How To Setup an Internet Gateway using Ubuntu

February 18, 2015 · claude Ubuntu 11.10 Ubuntu 11.04 Ubuntu +4

Setting up an Internet Gateway using Ubuntu is pretty straight forward. In order to do so, you will need:

SYSTEM WARNING: session_start()...No such file or directory.

February 18, 2015 · claude PHP Mantis

When installing Mantis in a shared hosting environment, you may get an error message like this one on the Mantis login panel: > SYSTEM WARNING: session\_start() [function.session-start]: open(/var/php\_sessions/sess\_ac5acafaecb612345675d30123456789,...

How to rotate or flip a video?

February 15, 2015 · claude Video Handbrake

This can be easily done using HandBrake. Simply add the following option in the tab VIDEO in the EXTRA OPTIONS box: , --rotate=n Take note that the comma and the space following it are required. n can take one of these values: 1 = x flip 2 = y flip 3...

Installing memcached to use it with php

February 13, 2015 · claude Ubuntu 11.10 Unix Ubuntu 11.04 +6

Installing Memcached with php support in Ubuntu is a matter of a few steps: sudo apt-get install memcached php5-memcached sudo service apache2 restart You can test if memcached is active by running this command: echo "stats settings" | nc localhost...

Logic Probe Case

February 9, 2015 · claude 3D Printing

This logic probe case is designed for the B&K Precision, Model DP 21. Nevertheless, many logic probes have the same form factor. The inner space (available space for storage) is 30 mm x 210 mm. Both parts should be printed with 100% of infill.

Tags