Antre du Tryphon

Solarbotics L298 Compact Motor Driver Drilling and Mounting Plates

April 15, 2015 · claude 3D Printing

This thing contains a mounting plate and a drilling guide for the “Solarbotics L298 Compact Motor Driver”. The base plate is 1.5 mm thick. M2 5 mm or 1/4″ 4-40 screws are needed to fasten the board to the mounting plate. The mounting holes are three...

Keyes Mosfet Power Control Board Mounting And Drilling Plates

April 14, 2015 · claude 3D Printing

This thing contains a mounting plate and a drilling guide for the “Keyes Mosfet Power Control Board”. The base plate is 1.5 mm thick. M2 5 mm or 1/4″ 4-40 screws are needed to fasten the board to the mounting plate. The mounting holes are three mm in...

ALTERA Cyclone II FPGA Development Board Mounting and Drilling Plates

April 13, 2015 · claude 3D Printing

This thing contains a mounting plate and a drilling guide for the “ALTERA Cyclone II FPGA Development Board”. The base plate is 1.5 mm thick. M2 5 mm or 1/4″ 4-40 screws are needed to fasten the board to the mounting plate. The mounting holes are...

PN532 Breakout Board Mounting Plate And Drilling Guide

April 12, 2015 · claude 3D Printing

This thing contains a mounting plate and a drilling guide for the Adafruit “PN532 Breakout Board" (ID 364). The base plate is two mm thick. M2 5 mm or 1/4″ 4-40 screws are needed to fasten the board to the mounting plate. The mounting holes are three...

SparkFun RFID USB Reader mounting plate and drilling guide

April 10, 2015 · claude 3D Printing

This thing contains a mounting plate and a drilling guide for the "SparkFun RFID USB Reader" (SEN-09963). The base plate is one mm thick. M2 5 mm or 1/4" 4-40 screws are needed to fasten the board to the mounting plate. The mounting holes are three...

SMD Probe Case

March 25, 2015 · claude 3D Printing

This SMD probe can be bought on Ali Express or Ebay. The inner space (available space for storage) is 47 mm x 177 mm. Both parts should be printed with 100% of infill.

Business Cards And Credit Cards Storage Box

March 21, 2015 · claude 3D Printing

It is suitable for Norh American 2.5" x 3 " business card. In addition, credit cards also fit in this box.

Octoprint and Cura Disk Image for the Raspberry Pi (Version 2015-03-15)

March 16, 2015 · claude Raspberry PI Wheezy 3D Printing +2

Cura integrated with Octoprint brings your 3D printer to the next level. You can download from HERE a fully functional image of Cura integrated with Octoprint. Simply copy this image to an SD-card of 4GB or more. Instruction to copy an image on an...

Fume Extractor

March 15, 2015 · claude 3D Printing

This fume extractor uses carbon filters of 130mm x 130mm x 10mm. These are used for the HAKKO 491/493 fume extractor. To build it, you'll need:

Aluminium Extrusion Led Strip Holder

March 7, 2015 · claude 3D Printing

This thing is a self-adhesive strip holder who covers a 20 mm wide aluminium extrusion (like Misumi). The strip is 175 mm x 20 mm. It snaps in the extrusion groove. Stick the led strip on the holder.

Tags