Audio Selector Enclosure for 3.5 mm Jacks (November 15, 2026)
English Français
Antre du Tryphon
Search
Hanging Open Box

Hanging Open Box

October 11, 2020 · claude 3D Printing
This is an open box that can be hanged using 2 screws. The diameter of the head of the screw must be less than 1 cm. Its dimensions are 100 mm wide, 100 mm in height and 60 mm depth.

3D Printing Trashcan

3D Printing Trashcan

September 26, 2020 · claude 3D Printing
This is a small trashcan for 3D printing. The way the cover is designed, plastic stuff in the trashcan won't spring back outside it. The trashcan is 80 mm in diameter, 100 mm in height.

Issues with Ubuntu 20.04 on AMD Ryzen 7 4800H and GeForce GTX 1660 Ti

Issues with Ubuntu 20.04 on AMD Ryzen 7 4800H and GeForce GTX 1660 Ti

August 4, 2020 · claude Linux Ubuntu 20.04 ASUS
UPDATE: Ubuntu 20.10 fixes the issues listed below.

Parametric Round Container

Parametric Round Container

July 13, 2020 · claude 3D Printing
It is a simple parametric round container.

Wires And Probes Hanger

Wires And Probes Hanger

June 26, 2020 · claude 3D Printing
This object will let you suspend your wires and probes on a door. To complete this assembly, you will need a pipe or tube of 5/8 in or 16 mm in diameter. Two little screws can also be used to secure the tube to the hanger. You will need to print 2...

Drawer Dividers for Small Parts Cabinet

Drawer Dividers for Small Parts Cabinet

June 13, 2020 · claude 3D Printing
These are small drawer dividers. There are 2 models. One for the drawer cabinet sold by Canadian Tire. The other one is for drawer cabinet sold by Home Depot.

40 mm Extrusion Vibration Absorber

40 mm Extrusion Vibration Absorber

May 31, 2020 · claude 3D Printing
This is an anti-vibration foot for 40 mm aluminum extrusion. I had good results using semi-flexible filament. I added some anti-sliding pad. They were specifically designed for an Ender-3 printer.

Kotto Fume Extractor Stand

Kotto Fume Extractor Stand

May 23, 2020 · claude 3D Printing
This is a stand for the Kotto Fume extractor that can be bought from Amazon. It raises the fume extractor by 3 cm.

Prusa MK3 Spool Holder with Bearings

Prusa MK3 Spool Holder with Bearings

May 16, 2020 · claude 3D Printing
This is a spool holder designed for the Prusa MK3S or any Prusa i3 printers. The dimensions of the top of the main plate shoud be 6.25mm x 40mm. It uses some 608zz bearings to reduce the friction between the spool and the holder. It makes printing...

2.36mm Wire Holder

2.36mm Wire Holder

May 8, 2020 · claude 3D Printing
This is a small wire holder. It is designed for 2.36 mm wires in diameter including its insulation.