Antre du Tryphon

Business Cards And Credit Cards Storage Box

March 21, 2015 · claude 3D Printing

It is suitable for Norh American 2.5" x 3 " business card. In addition, credit cards also fit in this box.

Octoprint and Cura Disk Image for the Raspberry Pi (Version 2015-03-15)

March 16, 2015 · claude Raspberry PI Wheezy 3D Printing +2

Cura integrated with Octoprint brings your 3D printer to the next level. You can download from HERE a fully functional image of Cura integrated with Octoprint. Simply copy this image to an SD-card of 4GB or more. Instruction to copy an image on an...

Fume Extractor

March 15, 2015 · claude 3D Printing

This fume extractor uses carbon filters of 130mm x 130mm x 10mm. These are used for the HAKKO 491/493 fume extractor. To build it, you'll need:

Aluminium Extrusion Led Strip Holder

March 7, 2015 · claude 3D Printing

This thing is a self-adhesive strip holder who covers a 20 mm wide aluminium extrusion (like Misumi). The strip is 175 mm x 20 mm. It snaps in the extrusion groove. Stick the led strip on the holder.

Fan Holder for Aluminium Extrusion (New Design)

March 5, 2015 · claude 3D Printing

This fan holder for aluminium extrusion replaces the previous design (Aluminium Extrusion Fan Holder). The fan is now placed on top of the Ramps instead beside it, which makes it easier to remove if needed. It uses a 60 mm fan.

Aluminium Extrusion Fan Holder

March 4, 2015 · claude 3D Printing

This is a 60 mm fan holder to cool off a 3D Printer Ramps. This holder is design to be mounted on aluminium extrusion. A deflector is also provided to prevent the air to go on the heated bed.

Terminal Block Holder for Aluminium Extrusion

March 3, 2015 · claude 3D Printing

These are simple terminal block holders for Misumi aluminium extrusion (or equivalent). There is a 3 to 4 mm space between the extrusion and the terminal block to run some wires.

3D Printing ABS Juice

March 1, 2015 · claude 3D Printing ABS

ABS juice makes the first layer of a print stick very well to the print bed. Put a small quantity of ABS juice on a paper towel and rub it gently on the printing bed. Making ABS juice is simple. In order to do so, you will need:

How to Install libnfc for PN532 NFC Readers on Linux

February 25, 2015 · claude Ubuntu 11.10 Ubuntu 11.04 Ubuntu +5

Installing libnfc for PN532 based NFC reader is not exactly as described in the documentation. Some information is scattered in the documentation. This installation guide has been tested with the GO2NFC GO2NFC141U NFC Reader and the Adafruit PN532...

How To Setup an Internet Gateway using Ubuntu

February 18, 2015 · claude Ubuntu 11.10 Ubuntu 11.04 Ubuntu +4

Setting up an Internet Gateway using Ubuntu is pretty straight forward. In order to do so, you will need:

Tags