Antre du Tryphon

Kotto Fume Extractor Stand

May 23, 2020 · claude 3D Printing

This is a stand for the Kotto Fume extractor that can be bought from Amazon. It raises the fume extractor by 3 cm.

Prusa MK3 Spool Holder with Bearings

May 16, 2020 · claude 3D Printing

This is a spool holder designed for the Prusa MK3S or any Prusa i3 printers. The dimensions of the top of the main plate shoud be 6.25mm x 40mm. It uses some 608zz bearings to reduce the friction between the spool and the holder. It makes printing...

2.36mm Wire Holder

May 8, 2020 · claude 3D Printing

This is a small wire holder. It is designed for 2.36 mm wires in diameter including its insulation.

Mini Solder Spool

May 1, 2020 · claude 3D Printing

Soldering electronic components using a large solder spool of 454 grams or so is quite inconvenient even if it is mounted on a solder spool holder. I prefer to wind a small amount of it on a smaller spool. This is what this mini solder spool is for....

Pull Handle

April 24, 2020 · claude 3D Printing

This is a simple pull handle. A #10 flat head screw is recommended to fasten it.

TRENDnet TK-409K KVM Holder for Ikea Ivar

April 18, 2020 · claude 3D Printing

This is a holder for a TRENDnet TK-409K KVM. The holder is hanged on a unit side of the Ikea Ivar shelving system. The TRENDnet TK-409K is a 4 ports Keyboard/Video/Mouse switch.

Parametric Bumper Feet

April 10, 2020 · claude 3D Printing

This is a simple OpenSCAD project that generates bumper feet for various objects. It was specifically designed to replace the lost bumper feet of a Falcon Print Trimmer. Printing it using TPU is the best way to go. A sample is included. To create a...

Nuvistor Display Stand

April 4, 2020 · claude 3D Printing

This is a display stand for an old electronic part: the Nuvistor which is a type of vacuum tube. It was announced by RCA in 1959.

ESP8266 Motion Sensor Case

March 27, 2020 · claude 3D Printing

This is a case for a motion sensor based on the ESP8266 and the HC-SR501, a PIR (motion) sensor.

4 inches x 0.7 inches Label Holder

March 20, 2020 · claude 3D Printing

This is a paper tag holder made out of 4 inches (10.1 cm) x 3 inches (7.6 cm) index cards. They fit an edge of about 1/4 (6.25 mm) of an inch wide. A piece of size 4 inches (10.1 cm) x 0.7 (1.75 cm) inch out of the index card fits well.

Tags