Antre du Tryphon

3018 CNC Emergency Switch Holder

August 5, 2022 · claude 3D Printing

This is a simple emergency switch holder for a 3018 CNC. The diameter of the hole for the switch is 13 mm. The normally open switch can be connected on the Z limit switch connector on the control board.

Cotton Pad Container

July 29, 2022 · claude 3D Printing

This is a 100 mm high cotton pad container. The cotton pad container has a diameter of a bit less than 60 mm.

100 mm Zip Tie Container

July 22, 2022 · claude 3D Printing

This is a 100 mm Zip Tie Container. It can contain more than 500 zip ties. It is divided in 10 compartments.

Small flashlight holder

July 16, 2022 · claude 3D Printing

This is a small flashlight holder that can be screwed on a wall and so on. It is specifically design for a Police Security 3 cubs flashlight.

Ikea Ivar tool holder

July 9, 2022 · claude 3D Printing

This is a tool holder designed to be hung on the side unit of the Ikea Ivar shelving system.

3DTouch CR-10/Ender-3 Mounting Bracket

July 2, 2022 · claude 3D Printing

This is a bracket to mount a 3DTouch on a CR-10 or an Ender 3 printer.

USB Type A breakout board case

June 25, 2022 · claude 3D Printing

This is a case for a USB Type A breakout board. The size of the PCB is 15 mm x 15 mm. You'll need a drop of glue to attach the cover to the main body.

Ikea Skogsta Inner Buckets

June 18, 2022 · claude 3D Printing

These are buckets for the Ikea Skogsta tool box. They were design for my own needs. I designed them to store my various pliers vertically. Nevertheless, they can be useful for anyone.

Parametric Small Part Trays

June 11, 2022 · claude 3D Printing

These openScad scripts generate a desk organizer for small parts. The base has a large storage area. It also holds removable part trays. An example is provided. Being a parametric design, these objects are way more useful if they are customized.

Fluval Flex 15 Gallons Light Replacement

June 4, 2022 · claude 3D Printing

This is a light replacement for a Fluval Flex 15 gallons aquarium. You will need a strip of WRBG LEDs. I suggest you to reuse the supplied LED controller. I've used some epoxy glue to seal the lens to the base and the wires to make it water tight....

Tags