Antre du Tryphon

DIY Clock Case Vattenkar Holder

November 30, 2024 · claude 3D Printing

This is a holder for the DIY Clocks model YSZ-4 and ZM-804 Case for Ikea's Vattenkar Desk Shelves.

DIY Clock Kit Case (YSZ-4 or ZM-804)

November 23, 2024 · claude 3D Printing

This is a case for the DIY clock kit YSZ-4 or ZM-804. Two versions are available: one when the display is soldered touching the PCB board and one when the display is soldered above the PCB without cutting the leads of the display. You'll need to...

Electroluminescent Wire (Neon) Power Supply Holder

November 9, 2024 · claude 3D Printing

This is an electroluminescent wire (neon) power supply holder. Two screws are required to mount it.

Clips For Electroluminescent (Neon) Wires

November 2, 2024 · claude 3D Printing

These are clips For electroluminescent (neon) wires of 2.25 mm in diameter. Small nails or glue is required to install them. 16 of them are printed at the time. You'll need to cut them out.

Belt Tension Gauge Case

October 26, 2024 · claude 3D Printing

This is a box to store a Belt Tension Gauge that can be bought on various Chinese website.

TronXY X5SA Entruder and Filament Sensor Mount

October 19, 2024 · claude 3D Printing

This is a mount for the extruder and the filament sensor for the TronXY X5SA. It replaces the stock mounts. This mount was designed to move both the extruder and the filament sensor in the middle of the back side of the printer. You can then shorten...

Parametric Trays

October 12, 2024 · claude 3D Printing

These openSCAD scripts generate square, round, rounded corner square trays. Modify the file RoundTray.scad, SquareTray.scad or RoundedCornerSquareTray.scad to get the corresponding tray. ParametricTrays.scad should not be modified

Coffee Filter Dryer

October 4, 2024 · claude 3D Printing

This is a coffee filter dryer. It also has many other uses such as plant pot base.

MRB063A USB Cable Checker Case

September 27, 2024 · claude 3D Printing

This is a case for a USB Cable Checker model MRB063A available from many sources such as AliExpress. The top part shall be printed with is face on the bed. The 3mf file contains the top part with lettering to be printed with 2 colors. The USB B...

Craftsman Flex Claw Holder

September 21, 2024 · claude 3D Printing

This is a minimalist holder for the Craftsman Flex Claw Holder.

Tags