Antre du Tryphon

20 mm wide 90 Degrees T-Slot Angle Brackets

April 28, 2014 · claude 3D Printing

20 x 20 x 20 mm, 20 x 40 x 40 mm and 20 x 60 x 60 mm 90 degrees T-Slot brackets.

How to display the version of Ubuntu you are running

April 18, 2014 · claude Ubuntu 11.10 Ubuntu 11.04 Ubuntu +1

From a terminal window, type in: lsb_release -a

Parametric Pipe/Rod/Tube Adapter

April 15, 2014 · claude 3D Printing

This openScad file is a pipe, tube or rod adapter. It lets you fit together two pipes of different diameters. Edit the file. Modify the first pipe diameter, the second pipe diameter, the adapter thickness and the total height. Render the file and you...

Tape Roll Holder Revisited

April 11, 2014 · claude 3D Printing

This is a simple holder for a Tape Roll. This design is much more robust than the previous one (Tape Roll Holder). You simply need to screw it to a vertical surface. You can use it for other purposes obviously.

Mounting plate for Arduino UNO/Duemilanove/Diecimila

April 6, 2014 · claude Arduino 3D Printing

A simple mounting plate for the Arduino UNO, Duemilavone, Diecimila, Freeduino or any other compatible boards. Use #4-40 screws to mount the board on the mounting plate.

40 MM Angle Bracket With Adjustable Foot

March 10, 2014 · claude 3D Printing

This is an adjustable foot for 40 mm T-Slot aluminium extrusion combined with a 90 degree bracket. It was design, especially for a 3D printer. It can serve other purposes obviously. You will likely need 4 feet and 4 angle brackets. Furthermore, you...

40 MM T-Slot Adjustable Foot

March 7, 2014 · claude 3D Printing

This is an adjustable foot for 40 mm T-Slot aluminium extrusion. It was design, especially for a 3D printer. It can serve other purposes obviously. You will likely need 4 feet, 2 right and 2 left supports. Furthermore, you will need four threaded...

40 MM T-Slot Angle Bracket

March 4, 2014 · claude 3D Printing

40 mm T-Slot Angle Bracket.

20 MM T-Slot End Caps

March 4, 2014 · claude 3D Printing

20 mm x 20 mm, 20 mm x 40 mm and 20 mm x 60 mm T-Slot end caps.

How to use the command line to make the internal speaker beep

March 1, 2014 · claude Ubuntu 11.10 Unix Ubuntu 11.04 +2

Two simple steps: Install the beep utility. Executing beep on the command line will make the internal speaker beep. apt-get install beep Add pcspkr to /etc/modules to load it at boot time. You can load it manually by executing modprobe pcspkr

Tags