Antre du Tryphon

Ivar Cable Hanger

March 2, 2019 · claude 3D Printing

This is a cable hanger to be installed on the side unit of the Ivar shelving system. You will need 2 #4-40, 1/2" bolts and the matching nuts.

Business Card Holder

February 23, 2019 · claude 3D Printing

This is a simple business card holder that can be hang on a 5 mm wide support. It can hold about 50 cards.

Power Brick Holder

February 16, 2019 · claude 3D Printing

This is a holder for a power brick of 18 cm (7 inches) in length, 4.5 cm (1 3/4 inch) tick and typically 7 cm (2 3/4 inches) in height. Nevertheless, it can be lower or higher.

P4.75-1R1G-16S Led Matrix Stand

February 9, 2019 · claude 3D Printing

This is a set of feet for the p4.75-1R1G-16S Led Matrix (32 x 64). It holds the display at a 30-degrees angle. You will need two 8mm M3 screws to attach the feet to the display.

Recycling Bin Holder

February 2, 2019 · claude 3D Printing

This is a Recycling Bin Holder 220 mm long. It is held by two screws.

DFR-0499 Led Matrix Stand

January 27, 2019 · claude 3D Printing

This is a set of feet for the DFR-0499 RGB Led Matrix (64 x 64). It holds the display at a 30-degrees angle. You will need two 8mm M3 screws to attach the feet to the display.

Parametric Storage Box

January 20, 2019 · claude 3D Printing

This is a simple SCAD file that generates a storage box and its cover. To create a box:

Foam Board Screen

January 13, 2019 · claude 3D Printing

These are simple brackets used to build a screen from 5 mm foam board. Using the proper size of foam board, it can be used for airbrushing, etc. Print as many as you need to make your screen.

Insulated Screwdriver Rack

January 5, 2019 · claude 3D Printing

This is a compact rack for the Mastercraft Insulated Screwdrivers set (8 pieces) (#057-3695-4)

Insulated Precision Screwdriver Rack

December 30, 2018 · claude 3D Printing

This is a compact rack for the Mastercraft Insulated Precision Screwdrivers set (6 pieces) (#057-3604-2)

Tags