Audio Selector Enclosure for 3.5 mm Jacks (November 15, 2026)
English Français
Antre du Tryphon
Search
FLSun Cube Foot

FLSun Cube Foot

September 8, 2019 · claude 3D Printing
This a part that is installed on the existing feet of the FLsun Cube. The stock feet made of aluminum damage the surface of the table on which the printer is installed. These will protect your work area.

FLSun Cube Bowden Tube Strain Relief

FLSun Cube Bowden Tube Strain Relief

August 31, 2019 · claude 3D Printing
This is a Bowden tube strain relief for the FLsun Cube. It should be installed near the extruder.

Reprap Discount LCD Holder for 2020 extrusion

Reprap Discount LCD Holder for 2020 extrusion

August 24, 2019 · claude 3D Printing
This Reprap Discount LCD holder has been specially designed for the FLSun Cube. This design lets you attach the display under a 2020 extrusion.

FLSun Cube X-Axis Belt Tensioner

FLSun Cube X-Axis Belt Tensioner

August 18, 2019 · claude 3D Printing
The FLSun Cube 3D printer does not come with an X-Axis belt tensioner. So, I designed one. The design is simple but very effective.

FLSun Cube Bed Level Adjustment Tool

FLSun Cube Bed Level Adjustment Tool

August 10, 2019 · claude 3D Printing
This is a simple tool to adjust the level of the bed of a FLSun Cube. Likely, it can be used with other printers such as the CR-10.

FLSun Cube Bed Cable Strain Relief

FLSun Cube Bed Cable Strain Relief

August 3, 2019 · claude 3D Printing
This is a strain relief for the heated bed cables of the FLSun Cube. A zip tie is used to fix it to the bed frame. I drilled a small hole to pass the zip tie through the bed frame.

FLSun Cube Extruder Cable Strain Relief/Holder i2

FLSun Cube Extruder Cable Strain Relief/Holder i2

July 27, 2019 · claude 3D Printing
This is a strain relief for the wires and the PTFE tube attached to the extruder of the FLSun Cube 3D printer. It is installed using the bolts of 2 of the linear bearing holders. The M4x16 bolts will need to be replaced by M4x20 bolts. A zip tie is...

2020 Extrusion Power Supply Stabilizer

2020 Extrusion Power Supply Stabilizer

July 21, 2019 · claude 3D Printing
This is a simple stabilizer for a power supply designed to be attached to a 2020 aluminum extrusion. This stabilizer is designed for the FLSun Cube. You will need an M3x8mm, M5x10mm, and a M5 T-NUT to install it.

FLSun Cube Extruder Cable Strain Relief/Holder

FLSun Cube Extruder Cable Strain Relief/Holder

July 13, 2019 · claude 3D Printing
This is a strain relief for the wires and the PTFE tube attached to the extruder of the FLSun Cube 3D printer. It is installed using the bolts of 2 of the linear bearing holders. The M4x16 bolts will need to be replaced by M4x20 bolts. A zip tie is...

20 mm wide 135 Degrees T-Slot Angle Brackets

20 mm wide 135 Degrees T-Slot Angle Brackets

July 7, 2019 · claude 3D Printing
20 x 20 x 20 mm, 20 x 40 x 40 mm and 20 x 60 x 60 mm 135 degrees T-Slot brackets.