Antre du Tryphon

Parametric Tool Vertical Organizer

May 28, 2022 · claude 3D Printing

This openScad file generates a thin tool vertical organizer. The width and the number of tools can be changed along the organizer size. It can be used to generate an organizer for any type of tools including wrenches, pliers, wood chisel and so on.

SDHC Adapter Extrusion Holder

May 21, 2022 · claude 3D Printing

This is a holder for the commonly available micro SD card to SDHC card adapter. You will need 2 M4 screws to install it.

Battery Mockups

May 14, 2022 · claude 3D Printing

This is an AA battery mockup designed to replace AA batteries with an external power source. You will need 2 one-sided PCB pieces. One with a 5 mm diameter and another one with a 9 mm diameter. You will need to print 2 body and attach one PCB piece...

Logitech Web Cam Magnetic Mount

May 7, 2022 · claude 3D Printing

This is a magnetic mount for Logitech webcams C170 and C270. Besides the printed parts, you will need one M4 x 10 mm screw, one M3 x 12 mm screw and a M3 brass insert.

2020 Extrusion Flat Cable Holder

April 30, 2022 · claude 3D Printing

This is a clip to hold flat cables against a 2020 extrusion. It protects the flat cable against damages that may be done by zip ties. You will need a 7.5 inches (190 mm) zip tie to install it.

TPU feet for 2020 aluminum extrusion

April 23, 2022 · claude 3D Printing

This is a TPU anti-vibration foot for 2020 aluminum extrusion. It was designed for 1610 and 3018 CNCs but obviously can be used for other purposes. It should be printed with TPU for best results.

Nozzles for the Rigid 18V Vacuum

April 16, 2022 · claude 3D Printing

These are a wide and a long nose nozzles for a Rigid Gen5X Brushless 18V Wet/Dry Vacuum. The previous wide nozzle design has been improved significantly. The internal diameter is about 31.5 mm, or 1-1/4 inch.

Parametric Hanging Box

April 9, 2022 · claude 3D Printing

This openSCAD model generates a box that can be attached using 2 screws on a wall, aluminum extrusion, etc. They can be offsetted from the center of the box if needed.

CNC Clamp Foot

April 2, 2022 · claude 3D Printing

This is a cap to protect a CNC bed from widely avalaible clamp damages.

Parametric Modular Storage System

March 26, 2022 · claude 3D Printing

This is a parametric modular storage system designed to organize an office drawer. Its main design goal was to be able to have 2 layers of storage in a drawer of a desk. So, on the top layer, you can use the trays (Trays.scad) which let you organize...

Tags