Antre du Tryphon

Bambu Lab AMS Riser Feet

February 4, 2024 · claude 3D Printing

This is an object that rises the Bambu Lab AMS by 14 mm. It was design to insert some led strip between the top printer glass and the AMS unit. You'll need four of those. It is recommended to print these using TPU 95.

XY-SK80H Buck Boost Converter Case

January 27, 2024 · claude 3D Printing

This is a case for a XY-SK80H Buck Boost Converter. It fits many different models having this form factor (39mm x 71.3 mm). You'll need the following to assemble it:

Ikea Vattenkar Cable Holder

January 13, 2024 · claude 3D Printing

This is a cable holder for the Ikea Vattenkar organizer. A M3 x 6 mm nut and bolt or equivalent are required for assembly.

Parametric Bottle Stabilizer

January 7, 2024 · claude 3D Printing

This is a bottle stabilizer parametric model. For now, it contains the configuration for Robert Oster and Noodle's ink bottles.

Desiccant Spool Tumbler Add-ons

December 30, 2023 · claude 3D Printing

These are two add-ons for the Desiccant Spool Tumbler designed by chuyskywalker (https://www.printables.com/model/436044-desiccant-spool-tumbler). I like the design. I'm constantly using them. A funnel is provided to fill them out with desiccant. The...

Parametric Funnel

December 27, 2023 · claude 3D Printing

This is a parametric funnel with optional hanging loop and angled stem.

Bambu Lab AMS Cardholder

November 24, 2023 · claude 3D Printing

This is a device that holds cards that identify the filament loaded in the Bambu Lab AMS unit. The size of the cards are 42.3 mm x 76 mm which corresponds to a 1/3 of a 5 x 3 inches index card. The numbers are highlighted using a Sharpie. A template...

DIN Rail Arduino Uno and Mega Mounts

November 10, 2023 · claude 3D Printing

These are din rail mounts for an Arduino Uno and Mega 2560 or any board that has these form factors. The din rail clip can be attached temporarily to the Arduino base using a piece of 1.75 mm filament. The clip can be attached horizontally or...

Din Rail Breadboard Mounts

October 28, 2023 · claude 3D Printing

These are din rail breadboard mounts for 400 and 830 points breadboards. The din rail clips can be attached temporarily to the breadboard base using a piece of 1.75 mm filament. The clips can be attached horizontally or vertically to the breadboard...

Chromatography Container

October 21, 2023 · claude 3D Printing

This is a small chromatography container. It can hold paper up to 5 cm in width, from 50 mm to 120 mm in length. The length given in the filename is the maximum length of the paper supported.

Tags