Simple human interface for Home Assistant

April 22, 2023 · claude Hardware 3D Printing Automation ESP8266 NodeMCU IoT Internet of Things Electronic Component

Description

This is a simple human interface project for Home Assistant. It helps me remind doing 2 daily tasks. Using Home Assistant automation, it lit a LED at a given time and use the corresponding button to reset it when I'm done.

Basic electronic skills are required, including some soldering. It uses only through-hole components. This project is based on the ESP8266. It includes the case for the board along with the support files to build the electronic board. They are included in the zip files. It includes the Fritzing board design, the part lists, the wiring connections and the Home Assistant configuration. Take note that not all the strip board cut-offs are visible in the Fritzing file. They are hidden under the components. Move them to find them all.

Support material is not required. An infill of 20% is recommended.

This object was designed using Solid Edge Community Edition.

Files

	CaseCover.stl
	CaseBack.stl
	SupportFiles.zip

This object is also published on the following site(s):

Simple human interface for Home Assistant (366)

You may request the source file(s) for this object by posting a comment below. Your email address will be used solely to deliver the requested source file(s) and for no other purpose.

By requesting the source file(s), you are granted permission to:

Share — Copy and redistribute the material, excluding the source file(s), in any medium or format.
Adapt — Remix, transform, and build upon the material.

By requesting the source file(s), you also agree to:

Give appropriate credit, provide a link to the license, and indicate whether changes were made. You may do so in any reasonable manner, provided that it does not suggest that the licensor endorses you or your use.
Not use the material for commercial purposes.
Distribute any derivative works under the same license as the original if you remix, transform, or build upon the material.
Not apply legal terms or technological measures that legally restrict others from exercising the rights granted by the license.
Not upload the source file(s) or any modified versions of the source file(s) to any website or file-sharing service.
The source file(s) are provided for your personal use only. However, you may freely upload and distribute any STL or OBJ files generated from the source file(s).

If you do not agree to all of these conditions, please do not request the source file(s).

Name

Comment

Do you agree to all these conditions?

This form cannot be submitted until 30 seconds have elapsed. You have time to read the conditions and fill out the form.

This project is distributed under the Creative Commons - Attribution - Non-Commercial - Share Alike (CC-BY-NC-SA) license.

Simple human interface for Home Assistant

Description

Files

This object is also published on the following site(s):

Leave a Comment