Parametric Wera Micro Screwdriver Trays

September 2, 2022 3D Printing object

Description

This is a parametric tray generator for Wera micro screwdrivers. The trays are optionally stackable. The STL are given as a basic set of trays. You may generate trays for an arbitrary number of screwdrivers.

Support material is not required. An infill of 20% is recommended.

This object was designed using openSCAD.

Files

	ParametricWeraMicroScrewdriverTrays.scad
	Screwdriver02.stl
	Screwdriver02_no_stack.stl
	Screwdriver04.stl
	Screwdriver04_no_stack.stl
	Screwdriver06.stl
	Screwdriver06_no_stack.stl
	Screwdriver08.stl
	Screwdriver08_no_stack.stl
	Screwdriver10.stl
	Screwdriver10_no_stack.stl
	Screwdriver12.stl
	Screwdriver12_no_stack.stl
	Screwdriver14.stl
	Screwdriver14_no_stack.stl
	Screwdriver16.stl
	Screwdriver16_no_stack.stl
	Screwdriver18.stl
	Screwdriver18_no_stack.stl

This object is also published on the following site(s):

Parametric Wera Micro Screwdriver Trays (339)

You may request the source file(s) for this object by posting a comment below. Your email address will be used solely to deliver the requested source file(s) and for no other purpose.

By requesting the source file(s), you are granted permission to:

Share — Copy and redistribute the material, excluding the source file(s), in any medium or format.
Adapt — Remix, transform, and build upon the material.

By requesting the source file(s), you also agree to:

Give appropriate credit, provide a link to the license, and indicate whether changes were made. You may do so in any reasonable manner, provided that it does not suggest that the licensor endorses you or your use.
Not use the material for commercial purposes.
Distribute any derivative works under the same license as the original if you remix, transform, or build upon the material.
Not apply legal terms or technological measures that legally restrict others from exercising the rights granted by the license.
Not upload the source file(s) or any modified versions of the source file(s) to any website or file-sharing service.
The source file(s) are provided for your personal use only. However, you may freely upload and distribute any STL or OBJ files generated from the source file(s).

If you do not agree to all of these conditions, please do not request the source file(s).

Name

Comment

Do you agree to all these conditions?

This form cannot be submitted until 30 seconds have elapsed. You have time to read the conditions and fill out the form.

This project is distributed under the Creative Commons - Attribution - Non-Commercial - Share Alike (CC-BY-NC-SA) license.

Parametric Wera Micro Screwdriver Trays

Description

Files

This object is also published on the following site(s):

Leave a Comment