EPM240 CPLD Development Board Base Plate

May 5, 2019 · claude 3D Printing

Description

This is a base plate for the Altera Max II EPM240 CPLD Development Board from LC Technologies. You will need 4 M2 x 4mm screws to assemble it.

No support is required. An infill of 20 to 30% is sufficient.

This object was designed using Fusion 360

Files

Altera-Max-II-EPM240-CPLD-Base-Plate.stl

This object is also published on the following site(s):

Thingiverse

EPM240 CPLD Development Board Base Plate (219)

You may request the source file(s) for this object by posting a comment below. Your email address will be used solely to deliver the requested source file(s) and for no other purpose.

By requesting the source file(s), you are granted permission to:

Share — Copy and redistribute the material, excluding the source file(s), in any medium or format.
Adapt — Remix, transform, and build upon the material.

By requesting the source file(s), you also agree to:

Give appropriate credit, provide a link to the license, and indicate whether changes were made. You may do so in any reasonable manner, provided that it does not suggest that the licensor endorses you or your use.
Not use the material for commercial purposes.
Distribute any derivative works under the same license as the original if you remix, transform, or build upon the material.
Not apply legal terms or technological measures that legally restrict others from exercising the rights granted by the license.
Not upload the source file(s) or any modified versions of the source file(s) to any website or file-sharing service.
The source file(s) are provided for your personal use only. However, you may freely upload and distribute any STL or OBJ files generated from the source file(s).

If you do not agree to all of these conditions, please do not request the source file(s).

Name

Comment

Do you agree to all these conditions?

This form cannot be submitted until 30 seconds have elapsed. You have time to read the conditions and fill out the form.

This project is distributed under the Creative Commons - Attribution - Non-Commercial - Share Alike (CC-BY-NC-SA) license.

Comments

Jonathan Lin February 29, 2024

Hi there! I'd like to request the source files for this Max ii epm240 baseplate.

Thank you.

ctheroux March 2, 2024

Hi, you’ll receive shortly a link from fileconvoy.com to download them. I remind you, by downloading them, you agree to the above terms. Mainly, you shall publish the modified model, free of charge as a remix on Thingiverse or Printables. Regards.

EPM240 CPLD Development Board Base Plate

Description

Files

This object is also published on the following site(s):

Comments

Leave a Comment