Bathroom Soap Dish
August 2, 2025
3D Printing
object
Description
This is another bathroom soap dish. This one is angled with a drain. A few drops of glue are required to attach the stand to the body.
Support material is not required. An infill of 20% is recommended.
This object was designed using Solid Edge Community Edition.
Files
|
Body.stl |
|
Grid.stl |
|
Stand.stl |
This object is also published on the following site(s):
This project is distributed under the Creative Commons - Attribution - Non-Commercial - Share Alike (CC-BY-NC-SA) license.
Copyright 2012–2026, Claude "Tryphon" Théroux
Leave a Comment